Description
Complete concealment and smooth clean design makes the ceiling-recessed Ultimate Access V ideal for boardrooms, mid-sized training rooms, universities, or home theaters. The background completely retracts and conceals behind a smooth, lower panel with no exposed screw heads or fasteners. During use, a second motor opens the lower panel upward into the case to allow the background to descend into the room. RF welded tabs create a more durable seal eliminating separation and stickiness for a perfectly flat viewing surface with better image quality. Placement of the ceiling-recessed case during the initial phase of construction eliminates job site damage and allows for installation of the surface at a later time.
Product Specs
- Case dimensions are 9-7/8" high x 8" deep (25 cm x 20 cm), includes trim flange.
- Built-in controls may increase case length. Mounting brackets may add to case dimensions. See Submittal in the Technical Documents tab for details.
- Maximum image width up to 12' (366 cm) wide, depending on surface selection.
- Image area fully framed with black. Standard 12" (30 cm) black drop at top of viewing area.
- Adjustable or removable hoisting brackets included for easy lifting during installation.
- Sliding brackets on top of case allow for adjustments for mounting. Sliding brackets inside case accommodate different size screens.
- Bottom closure panel detachable or hangs in place with “T” bracket to provide accessibility for service or maintenance.
- Fully automatic ceiling closure panel provides complete screen concealment. Can be finished by contractor to match ceiling.
- Independently motorized ceiling closure opens into the case.
- Quick-connect wiring allows for early installation of the case with the addition of the screen later.
- Includes a 110V three-position switch (standard). Quiet, low voltage motors and 220V options are available.
- Low voltage video interface or other controls can be built into the housing for below ceiling access.
- White case standard, black available upon request.
- Custom sizes available.
- UL Listed.
Screen Surface:
OptiFlex Grey XH600V
Grey color enhances color contrast and black levels in the projected image. The 0.6 gain Grey XH600V is great for moderate- to high-output digital projectors. It also allows for more ambient light in the audience area than matt white surfaces with a relatively broad viewing cone; however, it is not an ambient light rejecting surface. This surface comes with grey backing and is GREENGUARD Gold certified.
Screen Surface Overview:
- Maximum height without seams: 144" (366 cm).
- Wide viewing cone. High contrast.
- Gain: 0.6. Material does not reach half gain.
- Tech Data Sheet
Screen Surface:
OptiFlex Grey XH600V
Grey color enhances color contrast and black levels in the projected image. The 0.6 gain Grey XH600V is great for moderate- to high-output digital projectors. It also allows for more ambient light in the audience area than matt white surfaces with a relatively broad viewing cone; however, it is not an ambient light rejecting surface. This surface comes with grey backing and is GREENGUARD Gold certified.
Screen Surface Overview:
- Maximum height without seams: 144" (366 cm).
- Wide viewing cone. High contrast.
- Gain: 0.6. Material does not reach half gain.
- Tech Data Sheet
Screen Details
Diagonal Size: 161"
Screen Material: Grey XH600V
Series: Access V
Warranty: 5 Years